Audio-Technica AT-ART1000 Cartridge with HS10BK headshell Combo

AUDIO-TECHNICA AT-ART1000 CARTRIDGE COMBO SET
- Direct Power Stereo Moving Coil Cartridge mounted on HS10BK headshell.

This specific combo set was staged by LP GEAR so it could be documented and videoed; thus enabling the record playing world community to vicariously experience its historic sound quality. The cartridge was used for less than 60 minutes — practically new!

Audio-Technica AT-ART1000 cartridge specifications
- Type: Direct Power System
- Frequency response: 15 ~ 30,000 Hz
- Output voltage: 0.2mV (1kHz, 5 cm/sec.)
- Channel separation: 30 dB (1kHz)
- Output balance: 0.5 dB (1kHz)
- Tracking force: 2.0 ~ 2,5g (Each cartridge is supplied with its own tracking measurement)
- Coil impedance: 3 kΩ (1kHz)
- Rec. load impedance: 30Ω
- Static compliance: 30 × 10-6 cm/dyne
- Dynamic compliance: 12 × 10-6 cm/dyne (100Hz)
- Stylus: Special Line Contact
- Cantilever: 0.26mm (0.01") diameter solid boron
- Vertical tracking angle: 21 °
- Weight: 11.0g
- Accessories: Non-magnetic screw driver × 1, Cartridge installation screws 12mm × 2,18 mm × 2, PCOCC Lead wires × 4, Washer × 2, Protector, Nut × 2, × 1 Brush.

Note: Specifications are subject to change without notice.

_______________________________________

Footnote 1: Michael Fremer, "Analog Corner", Stereophile, Vol. 39 No.10 (October 2016) 21-27. Please read the full article to appreciate the capabilities of the AT-ART1000.

Footnote 2: "Recommended 500 Components", Stereophile, Vol. 39 No.10 (October 2016) 61.