Audio-Technica VM610 MONO cartridge

AUDIO-TECHNICA VM610 MONO CARTRIDGE

With a specialized body and internal wiring dedicated to monaural sound reproduction, the Audio-Technica VM-61 0MONO conical stylus cartridge is designed for playing mono records. Part of the 600 Series in Audio-Technica's new VM cartridge line — a line that harks back to A-T's early days as a manufacturer primarily of high-end phono cartridges — the VM610MONO is equipped with dual magnets that are internally connected to reduce record noise and obtain a highly focused "center" sound image that stereo cartridges can't provide.

Audio-Technica VM610 MONO cartridge specifications
- Type: VM
- Frequency response: 20 ~ 20,000 Hz
- Output voltage: 3.0 mV (1kHz, 5 cm/sec.)
- Channel separation: Not applicable
- Output balance: Not applicable
- Tracking force: 1.8 ~ 2.2 g (2.0 g standard)
- Coil impedance: 1.4 kΩ (1kHz)
- DC resistance: 400 ΩΩ
- Load impedance: 47 kΩ
- Load capacitance: 100 ~ 200 pF
- Coil inductance: 230 mH (1kHz)
- Static compliance: 35 × 10-6 cm/dyne
- Dynamic compliance: 8 × 10-6 cm/dyne (100Hz)
- Stylus: Bonded conical (0.6 mil)
- Cantilever: Aluminum pipe
- Vertical tracking angle: 23 °
- Dimensions: 17.3(H) × 17.0(W) × 28.2(D) mm
- Weight: 6.4 g
- Replacment stylus: VMN10CB
- Accessories: Cartridge installtion screws 5mm × 2, 10 mm × 2, Washer × 2, Hexagon nut × 2

Note: Specifications are subject to change without notice.