Grado Reference1 phono cartridge 5.0mV - For US sale only

GRADO THE REFERENCE1 PHONO CARTRIDGE

The newly redesigned Master1 and Reference1 cartridges have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. All this is hand-assembled within a machined, new processed, Australian Jarrah wood housing. The Reference1 uses a five piece OTL cantilever technology achieving an additional 5% tip mass reduction over the Platinum1 and Sonata1 models. The coils are wound with ultra-high purity long crystal (UHPLC) oxygen free copper wire. The Reference1 uses Grado's true ellipsoid design diamond..

Grado Reference 1 Phono Cartridge Specifications
- Type: Moving Iron
- Output voltage: 5mV
- Frequency response: 10Hz-60kHz
- Load impedance: 47k ohms
- Channel separation: 40dB
- Stylus type: Ellipsoid
- Stylus replacement: Factory replaceable
- Mounting: 1/2 inch
- Compliance: 20mm/N
- Tracking force: .075-2.0 g
- Recommended tracking force: 1.5 g
- Weight: 6.5 g